Reach · Version 1.0.1 · Bridge Setup

Connect Reach
to Ableton Live.

ReachBridge is the small MIDI Remote Script that lets Reach Control Surface communicate with Ableton Live 12. Install it once on your Mac or Windows computer, then select it as a Control Surface in Live.

ReachBridge for Reach 1.0.1 Ableton Live 12.4.6 or later macOS and Windows

ReachBridge for Reach 1.0.1 — Revision 4. Update the bridge for expanded Convert options, audio Clip conversion, loop-range retention, consistent Simpler slice pads, and Follow Main. Save your Set, quit Live completely, and replace the entire ReachBridge folder in the User Library selected in Live. Do not merge files; keep backups outside Remote Scripts. Restart Live, then use Check Again in Reach and confirm Running ReachBridge shows Revision 4 or later and Compatible. You can send the setup link to your computer from Reach.

Still using Reach 1.0? Open its matching downloads and guides.

Download ReachBridge for Reach 1.0.1

Download the ReachBridge for Reach 1.0.1 package, then unzip it. The downloaded archive contains one folder named ReachBridge.

Download ReachBridge for Reach 1.0.1

Keep the folder intact. Copy the complete ReachBridge folder. Do not copy its individual files separately, and do not place it inside another ReachBridge folder.

Reach 1.0.1 Guides

On a second iPad, tap SEC and turn on Follow Main to share Main’s track and clip selection while keeping your own view and device. Turn it off to browse independently. Main controls automatic track arming. Bluetooth discovery now resumes a previous Advertise choice when needed; Stop Advertising cancels recovery, and existing connections and MIDI routing stay unchanged.

Drag Start and End at the top of an audio waveform, and Loop Start and Loop End at the bottom. Drag the loop brace to move the whole loop without changing its length. Loop positions are retained when Loop is turned off and back on. Simpler slice pads stay numbered while editing effects on the same track; the Octave arrows page through slices, and Classic or One-Shot restores note names. Track switching clears old arm feedback to prevent a brief red flash. Convert uses the same large options panel throughout Reach and shows only available actions. Choose Simpler, Drum Pad, or Slice to New MIDI Track for audio. Slicing offers transients or beat divisions, creates a Drum Rack and MIDI sequence, and keeps the source. Sliced Simpler can also become a new MIDI track; other MIDI instrument chains can become a Drum Pad.

Start with the Quick Start Guide for connection and setup. Use the Owner’s Manual for all performance controls and workflows.

Read the Quick Start Guide online

Read the Owner’s Manual online

Download Manual PDF

Download Quick Start PDF

Install ReachBridge

Use the User Library selected in Live. In Live's browser, right-click User Library and choose Show in Finder (Mac) or Show in Explorer (Windows). Install in Remote Scripts inside that folder, including when it is on an external drive. Keep the drive connected.

When updating, save your Set, quit Live completely, and replace the complete ReachBridge folder. Do not merge old and new files.

  1. Quit Ableton Live.
  2. Unzip the ReachBridge download.
  3. Create a folder named Remote Scripts in your Ableton User Library if it does not already exist.
  4. Copy the complete ReachBridge folder into Remote Scripts.
  5. Restart Ableton Live.

macOS location

~/Music/Ableton/User Library/Remote Scripts/

Windows location

%USERPROFILE%\Documents\Ableton\User Library\Remote Scripts\

When installation is complete, the path should end with Remote Scripts/ReachBridge. A doubled folder such as ReachBridge/ReachBridge prevents Live from finding the expected package.

Configure Ableton Live

  1. Open Ableton Live 12.
  2. Open Settings, then Tempo & MIDI (older versions: Link, Tempo & MIDI).
  3. Add a Control Surface row and choose ReachBridge.
  4. Set both Input and Output to the same connection: the iPad USB or Bluetooth MIDI port on Mac, or the network session for Wi-Fi. Network session names may differ from the name shown in Reach.
  5. In Live's MIDI Ports list, turn Track on for that input. Leave Sync off unless your studio has a separate MIDI clock requirement.

If you already use Ableton Push, leave its existing Control Surface row unchanged.

Connect the iPad

Mac with USB

Recommended — most reliable. Connect directly with a USB cable.

  1. Connect the unlocked iPad to the Mac with a data-capable USB cable and trust the Mac if prompted.
  2. Open Audio MIDI Setup, choose Window → Show Audio Devices, find the iPad in the Audio Devices sidebar, and click Enable.
  3. Choose Mac + USB in Reach’s setup wizard. Reach selects USB MIDI automatically.
  4. In Live, set both ReachBridge Input and Output to the same USB MIDI port created when you enabled the iPad. The port is often named after the iPad, using the device name shown in iPad Settings, and may appear as IDAM MIDI Host on some Macs.
  5. On Test Connection, wait for Connected to Ableton Live. Reach checks a fresh bridge reply and current Live feedback automatically. Select and arm an instrument track in Live, then tap Play Test Note. If the note sounds and stops, tap Yes and finish setup. Otherwise, tap Something’s Wrong. Detailed Connection Test is optional. If the automatic check fails, install the latest ReachBridge, check both Live ports, and tap Check Again.

Your selected connection carries all notes, controls, and feedback.

Fix Connection and Setup Guide open the same wizard at Welcome. Your saved connection choice is preserved. Reopening setup does not reset onboarding history, start or reset a trial, or change purchases or access. Use Back and Continue to move through the instructions.

Mac with Bluetooth

Connect wirelessly directly to your Mac.

  1. Turn on Bluetooth on your Mac and this iPad. Keep Reach open.
  2. Give this iPad a distinct MIDI name below, then tap Advertise This iPad. Allow Bluetooth access if prompted.
  3. On your Mac, open Audio MIDI Setup.
  4. Choose Window → Show MIDI Studio, then click the Bluetooth button in the toolbar.
  5. Find this iPad’s MIDI name in the list and click Connect. Confirm any system pairing prompt.
  6. Wait for the Mac’s button to change to Disconnect.
  7. For another iPad, repeat these steps with a different MIDI name. Connect each iPad from the Mac; the Mac does not need to advertise.
  8. Continue to set up Live. Give each iPad its own ReachBridge row with its matching Bluetooth MIDI Input and Output.
  9. Notes, controls and feedback use one connection. Reach does not switch to another connection if this one disconnects.
  10. In Ableton Live, open Settings → Tempo & MIDI (called Link, Tempo & MIDI in older Live versions).
  11. Choose ReachBridge in a separate control-surface row for each iPad. For BOTH Input and Output in that row, choose the same iPad’s Bluetooth MIDI port. Match the MIDI name advertised by that iPad; macOS may retain its existing device name. Reach shows the Mac’s name. Enable Track for each iPad’s input. Leave Sync off. Remote is only needed for separate manual MIDI mappings. Preserve unrelated control-surface rows.
  12. On Test Connection, wait for Connected to Ableton Live. Reach checks a fresh bridge reply and current Live feedback automatically. Select and arm an instrument track in Live, then tap Play Test Note. If the note sounds and stops, tap Yes and finish setup. Otherwise, tap Something’s Wrong. Detailed Connection Test is optional. If the automatic check fails, install the latest ReachBridge, check both Live ports, and tap Check Again.
  13. If Bluetooth access is denied, tap Open Settings and enable Bluetooth for Reach. You can also go to iPad Settings → Privacy & Security → Bluetooth → Reach. Return to Reach, edit this iPad’s MIDI name if needed, then tap Advertise This iPad. Allowing access does not choose or change the MIDI name. After you choose Advertise, Reach remembers your choice and resumes discovery when reopened or when returning to Bluetooth, if no peer is connected and permission is already allowed. Stop Advertising cancels this recovery; tap Advertise again to enable it. Existing connections and MIDI routing are unchanged. If Bluetooth disconnects, keep Reach open and Bluetooth on. If this iPad is not advertising, tap Advertise This iPad, then click Connect beside its name in the Mac’s Audio MIDI Setup. If the first attempt fails, wait for Connect to return and try again. Reach waits for your selected Mac and does not replay notes played while disconnected. Stop Advertising stops discovery, not an existing connection; disconnect from the Mac to end that link.

Mac with Wi-Fi

Connect through the same Wi-Fi network.

  1. Connect the Mac and iPad to the same trusted Wi-Fi network. Keep Reach open on the iPad and allow Local Network access if prompted.
  2. On the Mac, open Audio MIDI Setup.
  3. Choose Window → Show MIDI Studio.
  4. Click the globe button beside Bluetooth in the MIDI Studio toolbar: Configure Network Driver.
  5. Under My Sessions, select an existing RTP session or choose Create New Session → RTP.
  6. Turn Enabled on for that session.
  7. Under Sessions and Directories, select the iPad and click Connect.
  8. Confirm the iPad appears under Connected Peers. Older macOS versions call these sections Directory and Participants.
  9. Reach automatically selects Wi-Fi MIDI and automatic port selection for this setup route. You do not need to open Settings.
  10. In Ableton Live, open Settings → Tempo & MIDI (called Link, Tempo & MIDI in older Live versions). Choose ReachBridge in a control-surface row. For BOTH Input and Output, choose the Mac RTP network session you enabled. Its name may differ from the port name shown on the iPad — for example, RTP Session 1 on the Mac and Network Session 1 in Reach.
  11. Enable Track for that session’s input and leave Sync off. Preserve unrelated control-surface rows.
  12. On Test Connection, wait for Connected to Ableton Live. Reach checks a fresh bridge reply and current Live feedback automatically. Select and arm an instrument track in Live, then tap Play Test Note. If the note sounds and stops, tap Yes and finish setup. Otherwise, tap Something’s Wrong. Detailed Connection Test is optional. If the automatic check fails, install the latest ReachBridge, check both Live ports, and tap Check Again.

Windows with Wi-Fi

Connect through the same Wi-Fi network using rtpMIDI.

Download rtpMIDI from Tobias Erichsen

  1. Connect the Windows PC and iPad to the same trusted Wi-Fi network. Keep Reach open and allow Local Network access if prompted.
  2. Install rtpMIDI from Tobias Erichsen’s official site, linked on the Reach setup page. Install Bonjour if prompted and make sure its service is running.
  3. Use a Private network in Windows and allow rtpMIDI and Bonjour through Windows Firewall for that network.
  4. In rtpMIDI, use the plus button under My Sessions to create a session. Set its Local Name (for example, Reach Session) and enable it.
  5. Select the iPad in Directory and click Connect. Confirm it appears under Participants for the enabled session.
  6. Reach automatically selects Wi-Fi MIDI and automatic port selection for this setup route. You do not need to open Settings.
  7. In Ableton Live, open Settings → Tempo & MIDI (called Link, Tempo & MIDI in older Live versions). Choose ReachBridge in a control-surface row. For BOTH Input and Output, choose the Windows rtpMIDI Local Name you enabled. Its name may differ from the port name shown on the iPad.
  8. Enable Track for that session’s input and leave Sync off. Preserve unrelated control-surface rows.
  9. On Test Connection, wait for Connected to Ableton Live. Reach checks a fresh bridge reply and current Live feedback automatically. Select and arm an instrument track in Live, then tap Play Test Note. If the note sounds and stops, tap Yes and finish setup. Otherwise, tap Something’s Wrong. Detailed Connection Test is optional. If the automatic check fails, install the latest ReachBridge, check both Live ports, and tap Check Again.

A Network MIDI port can appear before your computer connects. Confirm the iPad is listed under Connected Peers or Participants on your computer, then tap Continue to set up Live. ReachBridge is checked after Live is configured.

Windows Wi-Fi uses rtpMIDI and Bonjour. Direct iPad USB MIDI is not supported on Windows.

Troubleshooting

ReachBridge does not appear in Live

  • Confirm that the folder is named exactly ReachBridge.
  • Confirm that it is directly inside the Remote Scripts folder.
  • Quit and restart Live after installing or replacing the bridge.

Reach does not receive a bridge response

  • Confirm that Reach and Live are using the same MIDI port.
  • Confirm that both Input and Output are assigned to ReachBridge in Live.
  • On Mac USB, confirm that the iPad is enabled in Audio MIDI Setup.
  • On Wi-Fi, keep both devices on the same trusted, non-guest network.

Contact Support

Need help setting up ReachBridge?

support@moriahpoint.io

Please include your iPad model, iPadOS version, computer operating system, Ableton Live version, connection type, and a description of what you see.